Recording Proxy Data For Existing Clips; Deleting All Proxy Data From A Usb Flash Drive - Sony PMW-500 Operation Manual

Metadata: Saved in <Proav-ID>\Clip\
To stop recording of proxy data
To stop recording of proxy data only, without
stopping recording of original data, set
MAINTENANCE >USB >Memory Rec in the
setup menu to [Disable].
If recording fails
The message "USB Memory Error" appears. If
recording fails because the USB flash drive is
full, the message "USB Memory Full" appears.
Proxy data is saved in this unit's internal memory.
If recording fails because of a USB flash drive
defect or for some other reason, you can exchange
the USB flash drive or reconnect it, and rerecord
the proxy data saved in internal memory.
Recording Proxy Data for Existing
Clips
You can record proxy data for clips on SxS
memory cards to USB flash drives.
To record proxy data for all clips
1
Set MAINTENANCE >USB >Memory
Rec in the setup menu to [Enable].
2
Connect a USB flash drive formatted
with the FAT32 file system to the
external device connector (see page 73).
3
Insert an SxS memory card with
recorded clips.
4
Select MAINTENANCE >USB > Copy
All Clips in the setup menu, and press
the MENU knob.
5
Turn the MENU knob to select
[Execute], and then press the knob.
Recording of the proxy data starts.
The message "Copy All Clips Done" appears
when recording finishes.
To cue up a clip and record its proxy data
1
Set MAINTENANCE >USB >Memory
Rec in the setup menu to [Enable].
86
Recording Proxy Data
2
Connect a USB flash drive formatted
with the FAT32 file system to the
external device connector (see page 73).
3
Insert an SxS memory card with
recorded clips.
4
Cue up the clip for which you want to
record proxy data.
5
Select MAINTENANCE >USB > Copy
Current Clip in the setup menu, and
press the MENU knob.
6
Turn the MENU knob to select
[Execute], and then press the knob.
Recording of the proxy data starts.
The message "Copy Current Clip Done"
appears when recording finishes.
Deleting All Proxy Data from a
USB Flash Drive
You can delete all proxy data in the
\MSSONY\PRO\XDCAM\MEMDISC folder by
deleting the folder.
1
Set MAINTENANCE >USB >Memory
Rec in the setup menu to [Enable].
2
Connect a USB flash drive containing
proxy data to the external device
connector.
3
Select MAINTENANCE >USB > Del
All Memory Clips in the setup menu,
and press the MENU knob.
4
Turn the MENU knob to select
[Execute], and then press the knob.
Deletion of the folder starts.
The message "Delete All Clips Done"
appears when the deletion finishes.