Konica Minolta bizhub PRO C6501 User Manual page 192

4
Setting Item/Description
Original Glass AMS
Set the machine to detect the size of the original and select
the appropriate magnification ratio to correspond to the se-
lected paper size.
On/ Off
ADF AMS
Set the machine to automatically select an appropriate ratio
for copying when detecting the original size placed on the
ADF.
On/ Off
Non-Image Area Erase of orig.
Specify the conditions to be applied to [Non-Image Area
Erase of orig].
Yes/ APS/AMS/ Except Orig. Glass (1:1)
ADF Frame Erase
Set to erase the frame when copying in ADF mode.
None/ 1mm/ 2mm/ 3mm/ 4mm/ 5mm
Rotation
When the trays contain only the paper size different from
the original, rotate the image of the original and adjust to fit
into the copying paper size.
On - Always/ APS/AMS/ APS/AMS/ Reduce
Suspend Interruption
Set the timing to interrupt the present job when pressing
[Interrupt] while copying.
Stop Immediately/ When Current Comp.
Change Page Print Pos. (Booklet)
Set the page number position when using Booklet with
Page Numbering in Stamp.
Off/ On (Outside Print)
Printer Prohibit Timer
Select the interval time that printing via PC is prohibited af-
ter touching the touch keys.
Off/ 15 seconds/ 30 seconds/ 60 seconds/ 90 seconds
Bookmark function
Specify whether to delete the set bookmarks or not, or se-
lect to disable the bookmark function.
Off/ Release Every Job/ Not release
Orig./Out Bind Direction Set
Set the machine to conform the binding direction of the
originals and printed sets each other.
On/ Off
Choose Default Tray when APS Off
Select the tray to be automatically selected when APS is re-
leased.
APS Tray/ Tray1/ Tray2/ Tray3/ Tray4/ Tray5
Scan prohibit (pull out tray)
Set to stop scanning when pulling out the tray.
On/ Off
4-28
Utility Screen Outlines
Default
On
On
Yes
3mm
APS/AMS
When Current Comp.
Off
Off
Release Every Job
On
APS Tray
On
bizhub PRO C6501