Konica Minolta bizhub PRO C6501 User Manual page 180

4
Setting Item/Description
04 Copy Setting
Fold & Staple auto select
Set the machine to automatically select the Booklet mode
when Stapling & Folding mode is selected.
Yes/ No
Fine Adjust Margin
Select On/Off to enter a decimal point for image shift.
Yes/ No
Orig. Glass Auto Size Select
Set the machine to automatically select the same size of
copy paper as the original placed on the original glass.
On/ Off
Auto Detect Orig. Size in ADF
Set the machine to automatically select the same size of
copy paper as the original placed on the ADF.
On/ Off
Original Glass AMS
Set the machine to detect the size of the original and select
the appropriate magnification ratio to correspond to the se-
lected paper size.
On/ Off
ADF AMS
Set the machine to automatically select an appropriate ratio
for copying when detecting the original size placed on the
ADF.
On/ Off
Non-Image Area Erase of orig.
Specify the conditions to be applied to [Non-Image Area
Erase of orig].
Yes/ APS/AMS/ Except Orig. Glass (1:1)
ADF Frame Erase
Set to erase the frame when copying in ADF mode.
None/ 1mm/ 2mm/ 3mm/ 4mm/ 5mm
Rotation
When the trays contain only the paper size different from
the original, rotate the image of the original and adjust to fit
into the copying paper size.
On-Always /APS/AMS/ APS/AMS/ Reduce
Suspend Interruption
Set the timing to interrupt the present job when pressing
[Interrupt] while copying.
Stop Immediately/ When Current Comp.
Change Page Print Pos. (Booklet)
Set the page number position when using Booklet with
Page Numbering in Stamp.
Off/ On (Outside Print)
4-16
Utility Screen Outlines
Default
Yes
No
On
On
On
On
Yes
3mm
APS/AMS
When Current Comp.
Off
bizhub PRO C6501