Konica Minolta bizhub PRO C6501 User Manual page 155

Adjustment
5
Check the folding positions on the output sheet.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Tri-Fold Adjustment Screen will be restored.
7
Touch the required size key.
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -128 (left) to +127 (right), 1 step = 0.1 mm
– If specified value is positive, the folding positions move to the right.
Or, if negative value is specified, the folding positions move to the
left.
9
Repeat steps 3 to 8 until the desired result is obtained.
10
If adjustment in any other size is required, repeat steps 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
bizhub PRO C6501
3
3-119