Konica Minolta bizhub PRO C6501 User Manual page 131

Adjustment
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Select the PB tray or desired main body tray, then press [Start].
A sample pattern of perfect-bound book will be output.
5
Check that the paste applied on the body set is dried properly.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
7
Touch [Melt Tank -Low] or [Pasting Roller] to select the position to set
the temperature.
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range:
Melt Tank -Low 180 to 190 °C
Pasting Roller 160 to 170 °C
1 step = 1 °C
9
Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10
Touch [Return] to restore the Perfect Binder Adjustment Menu Screen.
bizhub PRO C6501
3
3-95