Konica Minolta bizhub PRO C6501 User Manual page 100

3
4
Load the desired size of paper to be adjusted on a tray, select Fold &
Staple and then press [Start] on the control panel.
A sample pattern will be output.
5
Check misalignment (a), in which misalignment occurs if the paper
width setting is larger than the actual width, or paper curving (b), in
which a sample set is curved if the paper width setting is smaller than
the actual width has occurred.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Staple Paper Width Adjustment Screen will be restored.
7
Display the required size key using up/down arrow keys, and touch it.
8
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is ob-
tained.
3-64
a
b
Adjustment
bizhub PRO C6501