Port Hybrid Vlan - HP 5900 series Command Reference Manual

port hybrid vlan

Use port hybrid vlan to assign the hybrid ports to the specified VLANs.
Use undo port hybrid vlan to remove the hybrid ports from the specified VLANs.
Syntax
port hybrid vlan vlan-list { tagged | untagged }
undo port hybrid vlan vlan-list
Default
A hybrid port allows only packets from VLAN 1 to pass through untagged.
Views
Ethernet interface view, aggregate interface view, S-channel interface view
Predefined user roles
network-admin
Parameters
vlan-list: Specifies a list of existing VLANs in the format of vlan-list = { vlan-id1 [ to vlan-id2 ] }&<1- 1 0>,
where vlan-id1 and vlan-id2 each are in the range of 1 to 4094, vlan-id2 cannot be smaller than
vlan-id1, and &<1- 1 0> indicates that you can specify up to 10 vlan-id1 [ to vlan-id2 ] parameters.
tagged: Configures the ports to send the packets of the specified VLANs without removing VLAN tags.
untagged: Configures the ports to send the packets of the specified VLANs after removing VLAN tags.
Usage guidelines
A hybrid port can carry multiple VLANs. If you execute the port hybrid vlan command multiple times, the
VLANs that the hybrid port allows are the VLANs that are specified by vlan-list in each execution.
The configuration made in Ethernet interface view applies only to the port.
•
The configuration made in aggregate interface view applies to the aggregate interface and its
•
aggregation member ports.
If the system fails to apply the configuration to the aggregate interface, it stops applying the
configuration to aggregation member ports.
If the system fails to apply the configuration to an aggregation member port, it skips the port
and moves to the next member port.
The configuration made in S-channel interface view applies only to the interface.
•
Examples
# Assign the hybrid port Ten-GigabitEthernet 1/0/1 to VLAN 2, VLAN 4, and VLAN 50 through VLAN
100, and configure Ten-GigabitEthernet 1/0/1 to send packets of these VLANs with tags.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port link-type hybrid
[Sysname-Ten-GigabitEthernet1/0/1] port hybrid vlan 2 4 50 to 100 tagged
Related commands
port link-type
154