Lacp Period Short; Lacp System-Priority - HP 5900 series Command Reference Manual

Examples
# Create aggregate interface Bridge-Aggregation 1 and enter its view.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1]

lacp period short

Use lacp period short to set the LACP timeout interval on a port to the short timeout interval (3 seconds),
and make the peer end to send LACPDUs quickly.
Use undo lacp period to restore the default setting.
Syntax
lacp period short
undo lacp period
Default
The LACP timeout interval is the long timeout interval (90 seconds).
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
Do not configure the short LACP timeout interval before performing an ISSU. Otherwise, traffic
interruption will occur during the ISSU.
Examples
# Set the LACP timeout interval on Ten-GigabitEthernet 1/0/1 to the short timeout interval (3 seconds).
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname- Ten-GigabitEthernet 1/0/1] lacp period short

lacp system-priority

Use lacp system-priority to set the system LACP priority.
Use undo lacp system-priority to restore the default setting.
Syntax
lacp system-priority system-priority
undo lacp system-priority
Default
The system LACP priority is 32768.
Views
System view
79