HP 5900 series Command Reference Manual page 19

If an interface type is specified but no interface number is specified, this command displays information
about all interfaces of that type.
If both the interface type and interface number are specified, this command displays information about
the specified interface.
Examples
# Display brief information about all interfaces.
<Sysname> display interface brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
Loop1
M-GE0/0/0
NULL0
REG0
Vlan1
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
BAGG1
FGE1/0/49
FGE1/0/51
FGE1/0/52
XGE1/0/1
XGE1/0/2
XGE1/0/3
XGE1/0/4
XGE1/0/5
XGE1/0/6
XGE1/0/7
XGE1/0/8
XGE1/0/9
# Display brief information about interface Ten-GigabitEthernet 1/0/3, including the full description of
the interface.
<Sysname> display interface brief ten-gigabitethernet 1/0/3 description
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
XGE1/0/3
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Link Protocol Main IP
UP UP(s) --
UP UP 192.168.0.61
UP UP(s) --
DOWN DOWN --
DOWN DOWN --
Link Speed Duplex Type PVID Description
DOWN auto A
DOWN 40G F
DOWN 40G F
DOWN 40G F
UP 10G(a) F(a)
DOWN auto A
DOWN auto A
DOWN auto A
DOWN auto A
DOWN auto A
DOWN auto A
DOWN auto A
DOWN auto A
Link Speed Duplex Type PVID Description
UP 1000M(a) F(a)
12
Description
one
A 1
A 50
A 52
A 53
A 3 lanswitch
A 4 aaaaaaaaaaaaaaaaaaaaaaaaaaa
A 5
A 6
A 7
A 8
A 9
A 10
A 1 aaaaaaaaaaaaaaaaaaaaaaaaaaaaa