Lldp Notification Med-Topology-Change Enable; Lldp Notification Remote-Change Enable - HP 5900 series Command Reference Manual

Syntax
lldp management-address-format string
undo lldp management-address-format
Default
The value in the management address TLV is numeric type.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
LLDP neighbors must use the same data type for the value field in the management address TLV.
Examples
# Change the data type of the value in the management address TLV to string type on
Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] lldp management-address-format string

lldp notification med-topology-change enable

Use lldp notification med-topology-change enable to enable LLDP-MED trapping.
Use undo lldp notification med-topology-change enable to disable LLDP-MED trapping.
Syntax
lldp notification med-topology-change enable
undo lldp notification med-topology-change enable
Default
LLDP-MED trapping is disabled on ports.
Views
Ethernet interface view
Predefined user roles
network-admin
Examples
# Enable LLDP-MED trapping for Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] lldp notification med-topology-change enable

lldp notification remote-change enable

Use lldp notification remote-change enable to enable LLDP trapping.
189