Stp Bpdu-Protection; Stp Bridge-Diameter - HP 5900 series Command Reference Manual

[Sysname] stp region-configuration
[Sysname-mst-region] revision-level 5
Related commands
active region-configuration
•
check region-configuration
•
display stp region-configuration
•
instance
•
• region-name
vlan-mapping modulo
•

stp bpdu-protection

Use stp bpdu-protection to enable the BPDU guard function.
Use undo stp bpdu-protection to disable the BPDU guard function.
Syntax
stp bpdu-protection
undo stp bpdu-protection
Default
The BPDU guard function is disabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable the BPDU guard function.
<Sysname> system-view
[Sysname] stp bpdu-protection

stp bridge-diameter

Use stp bridge-diameter to specify the network diameter, which is the maximum possible number of
stations between any two terminal devices on the switched network.
Use undo stp bridge-diameter to restore the default.
Syntax
stp bridge-diameter diameter
undo stp bridge-diameter
Default
The network diameter of the switched network is 7.
Views
System view
110