HP 5900 series Command Reference Manual page 178

Field
MED inventory information of
master board
FirmwareRev
SoftwareRev
SerialNum
Manufacturer name
Model name
LLDP local-information of port 1
Port ID type
Port ID
Management address interface
type
Management address interface
ID
Management address OID
Port VLAN ID(PVID)
Port and protocol VLAN ID(PPVID)
Port and protocol VLAN
supported
Port and protocol VLAN enabled
VLAN name of VLAN 1
Oper version
Sequence number
Acknowledge number
DCBX ETS subTLV info
Percentage
DCBX PFC subTLV info
P0-0 P1-0 P2-1 P3-1 P4-0
P5-0 P6-0 P7-0
Number of traffic classes
supported
DCBX APP subTLV info
Description
MED inventory information of the master device in an IRF fabric.
Firmware version.
Software version.
Serial number.
Device manufacturer.
Device model.
LLDP information to be sent out of port 1.
Port ID type:
•
MAC address.
•
Interface name.
Port ID, the value of which depends on the port ID type.
Numbering type of the interface identified by the management address.
Index of the interface identified by the management address.
Management address object ID.
Port VLAN ID.
Port protocol VLAN ID.
Indicates whether protocol VLAN is supported on the port.
Indicates whether protocol VLAN is enabled on the port.
Name of VLAN 1.
DCBX version number.
Number of DCBX TLV content changes.
Times of synchronizing configurations by the peer device.
CoS-to-local priority mapping and bandwidth allocation.
Parentage of bandwidth allocated.
Indicates whether PFC is enabled.
Indicates whether PFC is enabled for each 802.1p priority on the local
end:
•
1—Enabled.
•
0—Disabled.
Capability set supported by PFC (displayed only in Rev 1.01).
Application protocol-to-CoS mapping.
This field is not displayed, and only the following CoS map information is
displayed in DCBX Rev 1.00.
171