Stp Root Secondary - HP 5900 series Command Reference Manual

undo stp [ instance instance-list ] root
Default
A device is not a root bridge.
Views
System view
Predefined user roles
network-admin
Parameters
instance instance-list: Configures the device as the root bridge in the MSTIs that are specified by an
instance list, in the format of instance-list = { instance-id [ to instance-id ] }&<1- 1 0>, where &<1- 1 0>
indicates that you can specify up to 10 instances or instance ranges. The instance-id argument ranges
from 0 to 4094, and the value 0 represents the CIST. If you do not specify this option, the command
configures the device as the primary root bridge in the MSTP CIST or as the primary root bridge of STP
or RSTP.
Usage guidelines
Once you specify the device as the root bridge, you cannot change the priority of the device.
Examples
# In MSTP mode, specify the device as the root bridge of MSTI 1.
<Sysname> system-view
[Sysname] stp instance 1 root primary
Related commands
stp priority
•

stp root secondary

•
stp root secondary
Use stp root secondary to configure the device as a secondary root bridge.
Use undo stp root to restore the default.
Syntax
stp [ instance instance-list ] root secondary
undo stp [ instance instance-list ] root
Default
A device is not a secondary root bridge.
Views
System view
Predefined user roles
network-admin
Parameters
instance instance-list: Configures the device as a secondary root bridge in the MSTIs that are specified by
an instance list, in the format of instance-list = { instance-id [ to instance-id ] }&<1- 1 0>, where &<1- 1 0>
127