HP 5900 series Command Reference Manual page 152

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan-id1: Displays information about a VLAN specified by its VLAN ID in the range of 1 to 4094.
vlan-id1 to vlan-id2: Displays information about VLANs that are specified by a VLAN ID range. The
vlan-id1 and vlan-id2 arguments specify VLAN IDs in the range of 1 to 4094. The vlan-id1 argument
cannot be greater than the vlan-id2 argument.
all: Displays all VLAN information except for the reserved VLANs.
dynamic: Displays the number of dynamic VLANs and the ID for each dynamic VLAN. The dynamic
VLANs are distributed by a RADIUS server.
reserved: Displays information about the reserved VLANs. Protocol modules determine which VLANs are
reserved VLANs according to function implementation, and reserved VLANs serve protocol modules.
You cannot configure reserved VLANs.
static: Displays the number of static VLANs and the ID for each static VLAN. The static VLANs are
manually created.
Examples
# Display VLAN 2 information.
<Sysname> display vlan 2
VLAN ID: 2
VLAN type: Static
Route interface: Not configured
Description: VLAN 0002
Name: VLAN 0002
Tagged ports:
Untagged ports:
Ten-GigabitEthernet1/0/1
# Display VLAN 3 information.
<Sysname> display vlan 3
VLAN ID: 3
VLAN type: static
Route interface: Configured
IP address: 1.1.1.1
Subnet mask: 255.255.255.0
Description: VLAN 0003
Name: VLAN 0003
Tagged ports:
Untagged ports: None
None
Ten-GigabitEthernet1/0/2
None
145
Ten-GigabitEthernet1/0/3