Figure 37: Upnp Screen - Quasar CF-3211 User And Installation Manual

Note:
You may have to consult with your System Administrator to activate this function.
Traps for SNMP v1/v2/v3
Traps are used by the camera to send messages to a management system for important events or
status changes.

Enable traps – Check this box to activate trap reporting.

Trap address – Enter the IP address of the management server.

Trap community – Enter the community to use when sending a trap message to the
management system. The default value is public.

Trap Option

Warm start – A warm start SNMP trap signifies that the SNMP device, such as the
camera, performs a software reload.
Click Save when complete.
7.3.3.4 UPnP
The UPnP page enables the Universal Plug-and-Play protocol on your network devices.

Figure 37: UPnP Screen

Configuration and Operation
37