Mounting Instructions; Figure 7: Assign Ip Dialog Box - Quasar CF-3211 User And Installation Manual

Quasar CF-3211/CF-4221 User and Installation Guide
2. Right-click on the mouse and select the assigned IP or press the Assign IP button to open the
DNA Assign IP screen.
3. In the dialog box that is displayed, enter values for the IP Address, Gateway and Netmask.
4. Click Update and wait for
5. Disconnect the Ethernet cable. The camera is ready for deployment (mounting) in a site
installation.
Note:
The camera can be connected to a PC for bench installation via an Ethernet cross-
cable.
Note:
The camera default IP Address and the subnet mask IP Address are automatically
supplied by the DHCP server.
Tip:
A camera setup adapter, such as Veracity Pinpoint, can be used to connect a laptop
directly to the camera when using PoE.

5.5 Mounting Instructions

The following are mounting instructions for the DVTEL CF-3211 and CF-4221 Fixed IP cameras.
Caution:
The CF series indoor camera must be kept in a clean and dry indoor environment or in a
protective camera housing. Operating temperature should be maintained within -10°C
to 50°C (14° to 122°F). Operating humidity is 10% to 90% (non-condensing). The camera
should be kept dry, free from water condensation, dust, dirt, and smoke.
10
OK status to be displayed.

Figure 7: Assign IP Dialog Box