Software Version - Quasar CF-3211 User And Installation Manual

Full Restore
Click Full Restore to restore the factory default settings. The system restarts in 30 seconds.
Note:
The IP address and all other settings will be restored to factory default settings.
Partial Restore
Click Partial Restore to restore the factory default settings, but save the network settings. The
system restarts in 30 seconds.
Reboot
Clicking Reboot restarts the system without changing current settings.

7.3.18 Software Version

The current version of software is displayed in the Software version screen.
Figure 63: Partial Restore Screen
Figure 64: Software Version Screen
Configuration and Operation
63