Figure 18: Camera Lens Zoom And Focus Adjustment; Figure 19: Camera Housing Repositioning - Quasar CF-3211 User And Installation Manual

Quasar CF-3211/CF-4221 User and Installation Guide
5. Adjust the Pan and Tilt as follows:
a. For indoor installations without a housing
1. Loosen the tension screw on the bracket/stand and move (pan and tilt) the
camera so that the field of view is optimized for your scene and retighten the
tension bolt to hold the camera in place.
2. On the camera, adjust the zoom ring and focus ring on the camera lens for your
scene. If you have a manual iris, also adjust the iris ring on your lens.
b. For indoor or outdoor installations using a protective camera housing
1. Support the camera housing and loosen sufficiently the tension bolt on the
bracket Pan/Tilt assembly so that it allows you to reposition the camera housing.
2. Move the housing so that the camera field of view is optimized for your scene
and retighten the tension bolt on the wall bracket Pan/Tilt assembly.
3. On the camera, adjust the zoom ring and focus ring on the lens for your scene. If
you have a manual Iris, also adjust the iris ring on your lens. See Figure 18.
4. Adjust the camera and base plate by moving it either forward or backward so
that the camera lens close enough to the glass that it reduces the possibility of
reflection but does not make contact with the glass.
5. Tighten the base plate securely in place and close the camera housing lid.
6. Close the latch or tighten the screws firmly so that the lid seal is properly
maintained.
20

Figure 18: Camera Lens Zoom and Focus Adjustment

Figure 19: Camera Housing Repositioning