Quasar CF-3211/CF-4221 User and Installation Guide
Note:
Make sure that local recording (with a microSD/SDHC card) is activated so that this
function can be implemented. See
Send message by FTP/E-Mail – Select whether to send an alarm message by FTP and/or e-
mail when a network failure is detected.
Save
Click Save to save the network failure detection settings.
7.3.11 Tampering Alarm
The Tampering Alarm function helps the IP camera deal with tampering (such as, deliberate
redirection, blocking, paint-spraying, and obscuring the lens, etc.). Using video analysis, the camera
can react to such events by sending out notifications or uploading snapshots to the specified
destination(s).
Detection of camera tampering is achieved by measuring the differences between the older frames
of video (which are stored in buffers) and more recent frames.
Tampering Alarm
The tampering alarm function may be turned on or off in the Tampering Alarm page. The default
setting is Off.
By Schedule
For instructions how to set a schedule for the tampering alarm, refer to Schedule.
52
Recording
Figure 51: Tampering Alarm Screen
for further details.