Figure 28: Https Screen - Create Self-Signed Certificate; Figure 29: Https Screen - Install Signed Certificate - Quasar CF-3211 User And Installation Manual

To create a self-signed certificate:
Before a CA-issued certificate is obtained, you can first create and install a self-signed certificate.
1. On the HTTPS page, click Create under Create self-signed certificate.
2. Provide the requested information to install a self-signed certificate for the camera. Refer to
Provide the Certificate Information in this section for details.
To create a certificate request:
1. Click the Create Certificate Request button to create and submit a certificate request in
order to obtain a signed certificate from a CA.
2. Provide the requested information in the Created Request field. Refer to Provide the
Certificate Information in this section for details.
3. When the request is complete, the subject of the Created Request is shown in the field. Click
Properties below the Subject field, copy the PEM-formatted request and send it to your CA.
Figure 28: HTTPS Screen – Create Self-Signed Certificate
Figure 29: HTTPS Screen – Install Signed Certificate
Configuration and Operation
29