Adjusting And Framing-Up The Camera View - Quasar CF-3211 User And Installation Manual

6.7 Adjusting and Framing-Up the Camera View

After the camera is connected to the network and running, it is necessary to frame-up the scene and
adjust the camera settings to optimize the picture for the individual scenes. If Latitude is being used,
consider scheduling different settings for changing ambient conditions throughout the day, week,
month or seasons.
To adjust and frame-up the camera view:
1. In the DNA application, click DNA.
2. In the results, click to select the camera.
3. Right-click to open the shortcut menu, and select Browse, or enter the camera's IP
address in your Internet browser's URL address bar.
4. When the Internet browser connects to the camera and prompts for login, do the
following:
a) Log in using the default user name Admin and password 1234. If the password has
previously been changed, use the new password.
b) Allow the ActiveX to download and choose to install the DVTEL Web Player
(DCViewer).
To achieve this during the day, in the web interface, go to the Camera > Exposure screen
and select from the Exposure Setting menu Auto Shutter mode. Save changes and
complete the focusing steps. When finished, restore your exposure settings as needed.
Using the DNA Utility to Search and Access the Camera
Tip:
To view greater image detail for more accurate high-definition focusing, on
the web interface Home page, click the Full Screen
full screen view to check the focus.
Note:
Best focusing results can be achieved when the lens iris is fully open (such as
at night in low light). This prevents loss of sharpness if light levels are
reduced at night.
button and use the
19