Figure 92: Device Search Application – Select Browse - Quasar CF-3211 User And Installation Manual

Quasar CF-3211/CF-4221 User and Installation Guide
i) Select Static IP (preferable for security and Latitude users). In the IP Address,
Gateway, and Netmask, enter the respective LAN/VLAN (optional DNS) values.
ii) Click Apply. When prompted with instructions to search again after one minute,
click OK.
iii) After one minute, click Device Search. The communication settings should now
be changed and ready to install the camera on the network. Access it either via
the browser-based viewer or Latitude NVMS.
7. Right-click and select Browse to directly access the camera via a web browser. The
default web browser opens and requests access to the camera IP address.
8. When the web browser contacts the camera IP, do the following:
a) Log in using the default user name Admin and password 1234.
b) If the Information Bar (just below the URL bar) prompts for permission to install the
ActiveX Control for displaying video in the browser (see the figure below), right-click
on the Information Bar. Select Install ActiveX Control to allow the installation.
102
Figure 92: Device Search Application – Select Browse
Note:
ID and password are case-sensitive.
Note:
It is strongly advised that administrator's password be altered for security
reasons.
Figure 93: Device Search Application – Select Install ActiveX Control