Figure 44: Application - Record Stream To Sd Card - Quasar CF-3211 User And Installation Manual

Quasar CF-3211/CF-4221 User and Installation Guide
Alarm Output
Define the normal alarm output signal as Normal Close or Normal Open, according to the current
alarm application.
Triggered Action
The Administrator can specify various alarm actions to be taken when an alarm is triggered. The
options are listed below.

Enable alarm output – Select this box to enable alarm relay output.

Record stream to sd card – Select this box in order to save the alarm-triggered recording to
your microSD/SDHC card. Enter the number of seconds for the pre-trigger buffer. Select the
first radial button if you wish to upload for a specified length of time and enter the number
of seconds. Alternatively, select the second radial button to upload during the active trigger.
See Figure 44: Application – Record Stream to SD Card.
Note:
Make sure that local recording (with a microSD/SDHC card) is activated so that
this function can be implemented. See

Send Message by FTP/E-Mail – Select whether to send an alarm message by FTP and/or
e-mail when an alarm is triggered.
44
Figure 44: Application – Record Stream to SD Card
Recording for further details.