Program / Change / Delete Ldap Server - Ricoh aficio mp 1100 Operating Instructions Manual

System Settings

Program / Change / Delete LDAP Server

This section explains how to specify the LDAP server settings.
To program / change the LDAP server
A
2
Press [System Settings].
B
Press [Administrator Tools], and then press [TNext] twice.
C
Press [Program / Change / Delete LDAP Server].
D
Check that [Program / Change] is selected.
E
Select the LDAP server you want to program or change.
When programming the server, select [Not Programmed].
F
Set each item as necessary.
G
Press [OK] after setting each item.
For details about LDAP server, see "Programming the LDAP server".
H
Press [Exit].
I
Press the {User Tools} key.
Reference
p.79 "Programming the LDAP server"
To delete the programmed LDAP server
A
Press [System Settings].
B
Press [Administrator Tools], and then press [TNext] twice.
C
Press [Program / Change / Delete LDAP Server].
D
Press [Delete].
E
Select the LDAP server you want to delete.
F
Press [Yes].
G
Press [Exit].
H
Press the {User Tools} key.
78
Downloaded From ManualsPrinter.com Manuals