Table of Contents
Advertisement
a.
Download the Smart Component to a directory on the hard drive and change to that
directory.
Download the FPGA firmware for the Windows operating system
pub/softlib2/software1/sc-windows-fw/p2013128495/v68025).
Download the FPGA firmware for the Linux operating system
softlib2/software1/sc-linux-fw/p1486976799/v68026).
b.
From that drive and directory, execute the downloaded file. Linux users can execute "sh
CPxxxxxx.scexe" where CPxxxxxx.scexe represents the filename of the component. Click
"Install" when prompted.
c.
If the first update pass fails, retry flashing the FPGA.
d.
If the second update pass fails, browse to the iLO web information Diagnostics tab, and
use the Reset button to reset iLO.
e.
Retry flashing the FPGA.
f.
Upon successful update, the following dialog boxes will appear. Do not restart the server
at this time.
CAUTION:
components in this procedure have been updated.
g.
Click Restart Later.
10.
Flash the CPLD using the CPLD Smart Component.
Do not power off or power down the server until the firmware for all
(ftp://ftp.hp.com/
(ftp://ftp.hp.com/pub/
Flashing firmware using Smart Components
79
- Quick Links:
- Processor
- Xnc Module
- Spi Board Components
Hide quick links:
Advertisement
Table of Contents
