HP ProLiant DL980 G7 Maintenance And Service Manual page 71

6. Remove the SPI board
7. Remove the processor memory drawers
or processor memory drawer blank" (page
8. Remove the system board
9. Disconnect the upper cables from the power supply backplane:
a. Disconnect the upper fan power cable.
b. Remove the screws and disconnect the power cable.
c. Remove the lower fan power cable from the cable management slot.
10. Disconnect the lower cables from the power supply backplane:
a. Disconnect the lower fan power cable from the power backplane.
b. Lift the release latch.
c. Disconnect the lower power cable from the power supply backplane.
("SPI board components" (page
("Remove the upper or lower processor memory drawer
26)).
("System board" (page
96)).
68)).
Power backplane 71