Remove A Processor Memory Drawer Cover; Memory Cartridge - HP ProLiant DL980 G7 Maintenance And Service Manual

Remove a processor memory drawer cover

1. Power off the server
2. Remove the processor memory drawer.
or processor memory drawer blank" (page
3. Remove the processor memory drawer cover.
The procedure is the same for the upper and lower processor memory drawers, and the processor
memory drawer blank.
CAUTION:
Failure to cable the XNC will result in the lower processor memory drawer not being recognized
by the server.

Memory cartridge

NOTE: Be sure you are using the correct spare part number when replacing the memory cartridge.
The server ships with one of two different memory cartridges, which are not interchangeable.
To remove the component:
1. Power off the server
2. Remove the processor memory drawer
or processor memory drawer blank" (page
3. Remove the processor memory drawer cover
(page 27)).
4. Remove the failed memory cartridge.
("Power off the server" (page
XNC cabling ("XNC cabling" (page
("Power off the server" (page
22)).
("Remove the upper or lower processor memory drawer
26))
102)) is required for eight processor systems.
22)).
("Remove the upper or lower processor memory drawer
26)).
("Remove a processor memory drawer cover"
Remove a processor memory drawer cover 27