Displaying And Maintaining Information Center; Information Center Configuration Examples; Outputting Log Information To A Unix Log Host - HP 5500 EI Series Configuration Manual

Step
3. Disable the interface from
generating link up or link
down logging information.

Displaying and maintaining information center

Task
Display the information about
information channels.
Display the information about each
output destination.
Display the state of the log buffer
and the log information recorded.
Display a summary of the log
buffer.
Display the state of the trap buffer
and the trap information recorded.
Clear the log buffer.
Clear the trap buffer.

Information center configuration examples

Outputting log information to a UNIX log host

Network requirements
Configure the device to send ARP and IP log information that has a severity level of at least informational
to the UNIX log host at 1.2.0.1/16.
Figure 18 Network diagram
Command
undo enable log updown
Command
display channel [ channel-number |
channel-name ] [ | { begin | exclude |
include } regular-expression ]
display info-center [ | { begin | exclude |
include } regular-expression ]
display logbuffer [ reverse ] [ level severity |
size buffersize | slot slot-number ] * [ | { begin
| exclude | include } regular-expression ]
display logbuffer summary [ level severity |
slot slot-number ] * [ | { begin | exclude |
include } regular-expression ]
display trapbuffer [ reverse ] [ size buffersize ]
[ | { begin | exclude | include }
regular-expression ]
reset logbuffer
reset trapbuffer
53
Remarks
By default, all interfaces generate
link up and link down logging
information when the interface
state changes.
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.
Available in user view.