Displaying And Maintaining Poe - HP 5500 EI Series Configuration Manual

• Refresh mode—Enables you to update the PSE processing software without deleting it. Normally,
you can upgrade the PSE processing software in the refresh mode through the command line.
• Full mode—Deletes the PSE processing software and reloads it. If the PSE processing software is
damaged (in this case, you can execute none of PoE commands successfully), you can upgrade the
PSE processing software in full mode to restore the PSE function.
An in-service PSE processing software upgrade may be unexpectedly interrupted (for example, an error
results in device reboot). If you fail to upgrade the PSE processing software in full mode after reboot, you
can power off the device and restart it before upgrading it in full mode again. After upgrade, restart the
device manually to make the new PSE processing software take effect.
To upgrade the PSE processing software in service:
Step
1. Enter system view.
2. Upgrade the PSE processing software in service.

Displaying and maintaining PoE

Task
Display PSE information.
Display the power supplying
state of the specified PoE
interface.
Display power information for
PoE interfaces.
Display information about PSE.
Display the power supply
states of all PoE interfaces
connected to the PSE.
Display power information for
all PoE interfaces connected to
the PSE.
Display the configurations and
applications of the PoE profile.
Display the configurations and
applications of the PoE profile
applied to the specified PoE
interface.
Command
system-view
poe update { full | refresh } filename pse pse-id
Command
display poe device [ | { begin | exclude |
include } regular-expression ]
display poe interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
display poe interface power [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
display poe pse [ pse-id ] [ | { begin |
exclude | include } regular-expression ]
display poe pse pse-id interface [ | { begin |
exclude | include } regular-expression ]
display poe pse pse-id interface power [ |
{ begin | exclude | include }
regular-expression ]
display poe-profile [ index index | name
profile-name ] [ | { begin | exclude |
include } regular-expression ]
display poe-profile interface interface-type
interface-number [ | { begin | exclude |
include } regular-expression ]
173
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.