Snmp Test Configuration Example - HP 5500 EI Series Configuration Manual

UDP-jitter results:
RTT number: 410
One way results:
NOTE:
The display nqa history command does not show the results of UDP jitter tests. To know the result of a UDP
jitter test, use the display nqa result command to view the probe results of the latest NQA test, or use the
display nqa statistics command to view the statistics of NQA tests.

SNMP test configuration example

Network requirements
As shown in
query packet to the SNMP agent and receive a response packet.
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
Min positive SD: 3
Max positive SD: 30
Positive SD number: 186
Positive SD sum: 2602
Positive SD average: 13
Positive SD square sum: 45304
Min negative SD: 1
Max negative SD: 30
Negative SD number: 181
Negative SD sum: 181
Negative SD average: 13
Negative SD square sum: 46994
Max SD delay: 46
Min SD delay: 7
Number of SD delay: 410
Sum of SD delay: 3705
Square sum of SD delay: 45987
SD lost packet(s): 0
Lost packet(s) for unknown reason: 0
Figure 46, configure NQA SNMP tests to test the time it takes for Device A to send an SNMP
Min positive DS: 1
Max positive DS: 79
Positive DS number: 158
Positive DS sum: 1928
Positive DS average: 12
Positive DS square sum: 31682
Min negative DS: 1
Max negative DS: 78
Negative DS number: 209
Negative DS sum: 209
Negative DS average: 14
Negative DS square sum: 3030
Max DS delay: 46
Min DS delay: 7
Number of DS delay: 410
Sum of DS delay: 3891
Square sum of DS delay: 49393
DS lost packet(s): 0
146