HP 5500 EI Series Configuration Manual page 148

[DeviceA-nqa-admin-test-icmp-echo] probe timeout 500
[DeviceA-nqa-admin-test-icmp-echo] frequency 5000
# Enable the saving of history records and configure the maximum number of history records that can be
saved for a test group.
[DeviceA-nqa-admin-test-icmp-echo] history-record enable
[DeviceA-nqa-admin-test-icmp-echo] history-record number 10
[DeviceA-nqa-admin-test-icmp-echo] quit
# Start ICMP echo tests.
[DeviceA] nqa schedule admin test start-time now lifetime forever
# Stop the ICMP echo tests after a period of time.
[DeviceA] undo nqa schedule admin test
# Display the results of the last ICMP echo test.
[DeviceA] display nqa result admin test
NQA entry (admin admin, tag test) test results:
Destination IP address: 10.2.2.2
Send operation times: 10
Min/Max/Average round trip time: 2/5/3
Square-Sum of round trip time: 96
Last succeeded probe time: 2011-01-23 15:00:01.2
Extended results:
Packet loss in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
# Display the history of ICMP echo tests.
[DeviceA] display nqa history admin test
NQA entry (admin admin, tag test) history record(s):
Index Response
370 3
369 3
368 3
367 5
366 3
365 3
364 3
363 2
362 3
361 2
Receive response times: 10
Status Time
Succeeded 2011-01-23 15:00:01.2
Succeeded 2011-01-23 15:00:01.2
Succeeded 2011-01-23 15:00:01.2
Succeeded 2011-01-23 15:00:01.2
Succeeded 2011-01-23 15:00:01.2
Succeeded 2011-01-23 15:00:01.2
Succeeded 2011-01-23 15:00:01.1
Succeeded 2011-01-23 15:00:01.1
Succeeded 2011-01-23 15:00:01.1
Succeeded 2011-01-23 15:00:01.1
138