Configuring Tcp Tests - HP 5500 EI Series Configuration Manual

Step
1. Enter system view.
2. Enter NQA test group
view.
3. Configure the test type
as SNMP, and enter test
type view.
4. Configure the
destination address of
SNMP packets.
5. Specify the source port
of SNMP packets.
6. Configure the source IP
address of SNMP
packets.
7. Configure optional
parameters.

Configuring TCP tests

TCP tests of an NQA test group are used to test the TCP connection between the NQA client and a port
on the NQA server and the time for setting up a connection. The test result helps you evaluate the
availability and performance of the services provided by the port on the server.
TCP tests require cooperation between the NQA server and the NQA client. Before you start TCP tests,
configure a TCP listening service on the NQA server. For more information about the TCP listening
service configuration, see
To configure TCP tests:
Step
1. Enter system view.
2. Enter NQA test
group view.
3. Configure the test
type as TCP, and
enter test type view.
4. Configure the
destination address
of TCP probe
packets.
Command
system-view
nqa entry admin-name
operation-tag
type snmp
destination ip ip-address
source port port-number
source ip ip-address
See "Configuring optional
parameters for an NQA
test group"
"Configuring the NQA
Command
system-view
nqa entry admin-name
operation-tag
type tcp
destination ip ip-address
125
Remarks
N/A
N/A
N/A
By default, no destination IP address is
configured.
Optional.
By default, no source port number is specified.
Optional.
By default, no source IP address is specified.
The source IP address must be the IP address of
a local interface. The local interface must be up.
Otherwise, no probe packets can be sent out.
Optional.
server."
Remarks
N/A
N/A
N/A
By default, no destination IP address is configured.
The destination address must be the same as the IP
address of the listening service configured on the
NQA server.