Upgrading Pse Processing Software In Service; Displaying And Maintaining Poe - HP A3100-8 v2 EI Configuration Manual

To do...
Enter system view
Enter PoE interface view
Apply the PoE profile to the current
PoE interface
CAUTION:
A PoE profile can be applied to multiple PoE interfaces, and a PoE interface can be applied with only one
PoE profile.

Upgrading PSE processing software in service

You can upgrade the PSE processing software in service in either of the following modes:
Refresh mode—This mode enables you to update the PSE processing software without deleting it.
•
You can upgrade the PSE processing software in the refresh mode through the command line.
• Full mode—This mode deletes the PSE processing software and reloads it. If the PSE processing
software is damaged (you cannot execute any of the PoE commands successfully), you can upgrade
the PSE processing software in full mode to restore the PSE function.
An in-service PSE processing software upgrade may be unexpectedly interrupted (for example, an error
results in device reboot). If you fail to upgrade the PSE processing software in full mode after reboot, you
can power off the device and restart it before upgrading it in full mode again. After upgrade, the new
PSE processing software take effect.
Follow these steps to upgrade the PSE processing software in service:
To do...
Enter system view
Upgrade the PSE processing
software in service

Displaying and maintaining PoE

To do...
Display PSE information
Display the power supply state of
the specified PoE interface
Display the power information of a
PoE interface(s)
Use the command...
system-view
interface interface-type
interface-number
apply poe-profile { index index |
name profile-name }
Use the command...
system-view
poe update { full | refresh }
filename
Use the command...
display poe device [ | { begin |
exclude | include }
regular-expression ]
display poe interface
[ interface-type interface-number ]
[ | { begin | exclude | include }
regular-expression ]
display poe interface power
[ interface-type interface-number ]
[ | { begin | exclude | include }
regular-expression ]
79
Remarks
—
—
Required
Remarks
—
Required
Remarks
Available in any view