Installing The Smart Storage Battery - HP Apollo 4200 Gen9 User Manual

If a cache module is installed on a storage controller located in the PCI riser cage, connect the cache
15.
module backup power cable to any of the storage backup power connectors located in front of the
onboard PCIe expansion slot 7.
If you are planning to install the Smart Storage Battery Pack, install it now
16.
Storage
Install the air baffle (on page 32).
17.
Install the access panel (on page 30).
18.
Install the server into the rack (on page 45).
19.
Power up the server (on page 19).
20.
For more information about the integrated storage controller and its features, select the relevant user
documentation on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/smartstorage/docs).
To configure arrays, see the HPE Smart Storage Administrator User Guide on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/smartstorage/docs).

Installing the Smart Storage Battery

For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
CAUTION: In systems that use external data storage, be sure that the server is the first unit
to be powered down and the last to be powered back up. Taking this precaution ensures that
the system does not erroneously mark the external drives as failed when the server is powered
up.
To install the component:
Power down the server (on page 19).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the server from the rack (on page 28).
3.
Remove the access panel (on page 29).
4.
Install the Smart Storage Battery on the air baffle.
5.
Battery" on page 95).
("Installing the Smart
Hardware options installation 95