To install the component:
Power down the server (on page 19).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the server from the rack (on page 28).
3.
Remove the access panel (on page 29).
4.
Remove the FlexibleLOM blank.
5.
Install the FlexibleLOM adapter.
6.
Install the access panel (on page 30).
7.
Install the server into the rack (on page 45).
8.
Connect the LAN segment cables.
9.
Power up the server (on page 19).
10.
Hardware options installation 121