HP Apollo 4200 Gen9 User Manual page 79

If you are installing the H240 HBA for a two-bay SFF hot-plug rear drive cage that is connected to the
7.
front drive cage 2 backplane, disconnect the Mini-SAS cable from the rear drive backplane.
If you are installing the H240 HBA for a two-bay SFF hot-plug rear drive cage that is connected to the
8.
system board, disconnect the multiconnector drive signal cable:
Open the cable management holder (on page 32).
a.
Disconnect the multiconnector drive signal cable from the rear drive backplane and from the
b.
system board.
Close the cable management holder (on page 34).
c.
Hardware options installation 79