Installing An Fbwc Module And An Hp Smart Storage Battery - HP ProLiant DL160 Gen9 User Manual

Install the server into the rack
13.
Connect all necessary external cables to the storage controller. For more information on these cabling
14.
requirements, see the documentation that ships with the option.
Power up the server (on page 17).
15.
CAUTION:
all bays are populated with either a component or a blank.
Install the drives
16.
For more information about the integrated storage controller and its features, select the relevant user
documentation on the HP website (http://www.hp.com/go/smartstorage/docs).
To configure arrays, see the HP Smart Storage Administrator User Guide on the HP website
(http://www.hp.com/go/smartstorage/docs).

Installing an FBWC module and an HP Smart Storage Battery

For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
CAUTION:
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the external drives as failed when the server is powered up.
To install the component:
Power down the server (on page 17).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 17).
o
Remove the server from the rack (on page 19).
o
Remove the access panel (on page 20).
4.
Remove the PCI riser cage (on page 21).
5.
CAUTION:
cache module and cable are susceptible to damage. Avoid excessive force and use caution to
avoid damage to these connectors.
If you intend to use an FBWC module, install the module on the storage controller. Depending on the
6.
controller model, the cable connector on the cache module might be facing up or down when the
module is installed on the controller board.
("Installing the server into the
To prevent improper cooling and thermal damage, do not operate the server unless
("Drive options" on page 36).
In systems that use external data storage, be sure that the server is the first unit to be
When connecting or disconnecting the cache module cable, the connectors on the
rack" on page 29).
Hardware options installation 47