Hardware Options Installation; Introduction; Security Bezel Option; Drive Options - HP Apollo 4200 Gen9 User Manual

Hide thumbs Also See for Apollo 4200 Gen9:

Table of Contents

Hardware options installation

If more than one option is being installed, read the installation instructions for all the hardware options and

identify similar steps to streamline the installation process.

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power

input modules, and the internal system components to cool before touching them.

CAUTION: To prevent damage to electrical components, properly ground the server before

beginning any installation procedure. Improper grounding can cause electrostatic discharge.

The security bezel helps prevent unauthorized physical access to the front panel components. Install the

security bezel and then lock it with the key provided with the kit.

For a list of drive configurations supported in this server, see "Drive numbering (on page 15)."

The embedded Dynamic Smart Array B140i Controller supports SATA drive installation. For SAS support,

connect the drive to the onboard Flexible Smart Array P840ar Controller or to a Smart HBA or a Smart

Array Controller option.

For more information about product features, specifications, options, configurations, and compatibility,

see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).

Hardware options installation 51

Table of Contents

Show Quick Links

Table of Contents