HP Apollo 4200 Gen9 User Manual page 85

Install the Smart Array P440 Controller Mini-SAS Y-cable for a rear drive cage
option
Power down the server (on page 19).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the server from the rack (on page 28).
3.
Remove the access panel (on page 29).
4.
Remove the air baffle (on page 30).
5.
If you are installing the P440 controller for the four-bay LFF hot-plug rear drive cage, do one of the
6.
following:
Disconnect the Mini-SAS cable connected to the front drive cage 2 backplane from the rear drive
o
backplane.
Disconnect the Mini-SAS cable from the rear drive backplane and from the system board.
o
Hardware options installation 85