Installing An Hp Smart Storage Battery - HP ProLiant ML350 Gen9 User Manual

Do one of the following:
19.
For tower models, install the tower bezel (on page 31).
o
For rack models, install the security bezel
o
For more information on the HP Smart Array storage controllers, select the relevant user documentation on the
HP website (http://www.hp.com/go/smartstorage/docs).
To configure arrays, see the HP Smart Storage Administrator User Guide on the HP website
(http://www.hp.com/go/smartstorage/docs).

Installing an HP Smart Storage Battery

For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
CAUTION:
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the external drives as failed when the server is powered up.
To install the component:
Do one of the following:
1.
For tower models, open and remove the tower bezel
o
For rack models, if installed, remove the security bezel
o
page 30).
Power down the server (on page 29).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
4.
For tower models, place the server on a flat, level surface with the access panel facing up.
o
For rack models, extend the server from the rack (on page 33).
o
Remove the access panel (on page 31).
5.
Remove the air baffle (on page 33).
6.
Remove the fan cage (on page 36).
7.
In systems that use external data storage, be sure that the server is the first unit to be
("Security bezel option" on page 48).
("Remove the tower
("Remove the security bezel
bezel" on page 30).
(optional)" on
Hardware options installation 72