Client Qos Association - Cisco WAP551 Administration Manual

Client Quality of Service

Client QoS Association

STEP 7
NOTE
Client QoS Association
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
• Send—Specifies that all packets for the associated traffic stream are to be forwarded if
the class map criteria is met.
• Drop—Specifies that all packets for the associated traffic stream are to be dropped if the
class map criteria is met.
• Mark Class of Service—Marks all packets for the associated traffic stream with the
specified class of service value in the priority field of the 802.1p header. If the packet
does not already contain this header, one is inserted. The CoS value is an integer from
0 to 7.
• Mark IP DSCP—Marks all packets for the associated traffic stream with the IP DSCP
value you select from the list or specify.
- Select from List—A list of DSCP types.
- Match to Value—A DSCP value that you specify. The value is an integer between 0
to 63.
• Mark IP Precedence—Marks all packets for the associated traffic stream with the
specified IP precedence value. The IP precedence value is an integer from 0 to 7.
• Disassociate Class Map—Removes the class selected in the Class Map Name list from
the policy selected in the Policy Map Name list.
• Member Classes—Lists all DiffServ classes currently defined as members of the
selected policy. If no class is associated with the policy, the field is empty.
Click Save. The changes are saved to the Startup Configuration.
To delete a policy map, select it in the Policy Map Name list and click Delete.
The Client QoS Association page provides additional control over certain QoS aspects of
wireless clients that connect to the network, such as the amount of bandwidth an individual
client is allowed to send and receive. To control general categories of traffic, such as HTTP
traffic or traffic from a specific subnet, you can configure ACLs and assign them to one or
more VAPs.
7
130