Adding A Class Map - Cisco WAP551 Administration Manual

Client Quality of Service
Class Map
STEP 1
STEP 2
STEP 3
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

Adding a Class Map

Adding a Class Map
To add a class map:
Select Client QoS > Class Map in the navigation pane.
Class Map
Enter a Class Map Name. The name can include from 1 to 31 alphanumeric characters and the
following special characters: hyphen, underscore, backslash, and colon. Spaces are not
allowed.
Select a value from the Match Layer 3 Protocol list:
• IPv4—The class map applies only to IPv4 traffic on the WAP device.
• IPv6—The class map applies only to IPv6 traffic on the WAP device.
7
123