Cisco WAP551 Administration Manual page 90

Wireless
Radio
STEP 1
STEP 2
STEP 3
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
Select Wireless > Radio in the navigation pane.
Radio
121/321
551/561
In the Global Settings area, configure the TSPEC Violation Interval, which is the time interval
in seconds for the WAP device to report associated clients that do not adhere to mandatory
admission control procedures. The reporting occurs through the system log and SNMP traps.
Enter a time from 0 to 900 seconds. The default is 300 seconds.
In the Basic Settings area, configure these settings:
Local regulations may prohibit the use of certain radio modes. Not all modes are
NOTE
available in all countries.
• Radio—Turns on or off the radio interface. By default, the radio is off.
• MAC Address—The Media Access Control (MAC) address for the interface. The MAC
address is assigned by the manufacturer and cannot be changed.
• Mode—The IEEE 802.11 standard and frequency the radio uses. one of the available
modes:
5
59