Cisco WAP551 Administration Manual page 162

Client Quality of Service
Policy Map
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
Select Client QoS > Policy Map in the navigation pane.
Policy Map
Enter a Policy Map Name The name can include from 1 to 31 alphanumeric characters and the
following special characters: hyphen, underscore, backslash, and colon. Spaces are not
allowed.
Click Add Policy Map. The page refreshes with additional fields for configuring the policy
map.
In the Policy Class Definition area, ensure that the newly created policy map shows in the
Policy Map Name list.
In the Class Map Name list, select the class map to apply this policy.
Configure the parameters:
• Police Simple—Establishes the traffic policing style for the class. The simple form of
the policing style uses a single data rate and burst size, resulting in two outcomes:
conform and nonconform. If you select this field, configure one of these fields:
- Committed Rate—The committed rate, in Kbps, to which traffic must conform. The
range is from 1 to 1000000 Kbps.
- Committed Burst—The committed burst size, in bytes, to which traffic must
conform. The range is from 1 to 204800000 bytes.
7
129