Cisco WAP551 Administration Manual page 150

Client Quality of Service
ACL
STEP 4
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
The page shows additional fields for configuring the ACL.
ACL Configuration
Configure the rule parameters:
• ACL Name - ACL Type—The ACL to configure with the new rule. The list contains all
ACLs added in the ACL Configuration section.
• Rule—The action to be taken:
- Select New Rule to configure a new rule for the selected ACL.
- If rules already exist (even if created for use with other ACLs), you can select the
rule number to add the rule to the selected ACL or to modify the rule.
When an ACL has multiple rules, the rules are applied to the packet or frame in the order
in which you add them to the ACL. There is an implicit deny all rule as the final rule.
• Action—Whether the ACL rule permits or denies an action.
When you select Permit, the rule allows all traffic that meets the rule criteria to enter or
exit the WAP device (depending on the ACL direction you select). Traffic that does not
meet the criteria is dropped.
7
117