Access Points - Cisco WAP551 Administration Manual

Single Point Setup

Access Points

Access Points
STEP 1
STEP 2
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
The Access Points page allows you to enable or disable Single Point Setup on a WAP device,
view the cluster members, and configure the location, cluster name for a member, cluster
priority and cluster management IP address. You can also click the IP address of a member to
configure and view data on that device.
Configuring the WAP Device for Single Point Setup
Configuring the WAP Device for Single Point Setup
To configure the location and name of an individual Single Point Setup cluster member:
Select Single Point Setup > Access Points in the navigation pane.
Access Points
Single Point Setup is disabled by default on the WAP device. When disabled, the Enable
Single Point Setup button is visible. If Single Point Setup is enabled, the Disable Single Point
Setup button is visible. You can edit Single Point Setup options only when Single Point Setup
is disabled.
Icons on the right side of the page indicate whether Single Point Setup is enabled and, if it is,
the number of WAP devices that are currently joined in the cluster.
With Single Point Setup disabled, configure the following information for each individual
member of a Single Point Setup cluster.
• Location—Enter a description of where the access point is physically located, for
example, Reception. The location field is optional.
• Cluster Name—Enter the name of the cluster for the WAP device to join, for example
Reception_Cluster.
10
157