Vlan Ids - Cisco WAP551 Administration Manual

Wireless
Networks
NOTE
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
The SSID can be any alphanumeric, case-sensitive entry from 2 to 32 characters. The printable
characters plus the space (ASCII 0x20) are allowed, but these six characters are not:
?, ", $, [, \, ], and +.
The allowable characters are:
ASCII 0x20, 0x21, 0x23, 0x25 through 0x2A, 0x2C through 0x3E, 0x40 through
0x5A, 0x5E through 0x7E.
In addition, these three characters cannot be the first character:
!, #, and ; (ASCII 0x21, 0x23, and 0x3B, respectively).
Trailing and leading spaces (ASCII 0x20) are not permitted.
This means that spaces are allowed within the SSID, but not as the first or last character, and
the period "." (ASCII 0x2E) is also allowed.

VLAN IDs

VLAN IDs
Each VAP is associated with a VLAN, which is identified by a VLAN ID (VID). A VID can
be any value from 1 to 4094, inclusive. The support active VLANs (for WLAN plus one
management VLAN).
By default, the VID assigned to the configuration utility for the WAP device is 1, which is also
the default untagged VID. If the management VID is the same as the VID assigned to a VAP,
then the WLAN clients associated with this specific VAP can administer the WAP device. If
needed, an access control list (ACL) can be created to disable administration from WLAN
clients.
Networks
121/321
5
71