Toshiba RemotEye II User Manual page 97

Installation of RemotEye Client using UNIX
Introduction
RSH is a software daemon which is able to get/set specific command from/into RemotEye. The major
intention of this software is to shutdown the local machine before the UPS runs out of power. This
program is composed by shell scripts, written in bash, and virtually portable under any UNIX operating
system. The program consists of three phases: the installation phase, the execution phase, and the
configuration phase.
•
The installation phase will help the user setup the program properly by asking a few questions.
•
The execution phase will keep track of the status of a UPS via RemotEye.
•
The configuration phase will guide user to reconfigure the setting that is made in installation phase.
Program Overview
When installing this program, the shutdown shell application will check the target machine's Operating
System (OS) and determine whether it is a predefined OS from the recognized OS list. If it is not, the
user will be prompted to answer some questions regarding system information (such as cmd name, path,
etc). During the configuration phase, the program will ask user for information regarding the RemotEye
(such as its IP address, name, etc). The reconfiguration phase allows the user to change the settings for
later use. After installation, users can execute the program immediately or during the next system reboot.
Supported Operating System
1. Red Hat Advance Server release 2.1 AS
2. Sun Solaris 8 (x86)
3. Sun Solaris 8 (SPARC)
4. HP-UX (PA-RISC)
96 RemotEye II User Manual – 50024-014