Configuring The Remoteye Ii Via Snmp - Toshiba RemotEye II User Manual

Configuring the Remoteye II via SNMP

The RemotEye II supports SNMP. Any workstation with SNMP management software can manage a
Toshiba UPS through RemotEye II.
Note: This section will focus entirely on RemotEye II operation in conjunction with the RFC1628-
compatible MIB, Toshiba.mib.
System Requirements
There are two components of an SNMP system: an Agent and a Manager. The Agent collects information
about a network node. The Manager collects information from the Agent.
The RemotEye II provides an Agent for a Toshiba UPS. The Manager is a software application that is
provided separately. A workstation running Manager software is considered a Network Management
Station (NMS).
There are many Manager applications available. Some commonly used applications are listed below:
Cabletron Spectrum,
DEC Polycenter,
HP OpenView,
IBM NetView,
Novell Managewise, and
SunNet Manager.
The RemotEye II and the Manager software must be configured to communicate with one another.
74 RemotEye II User Manual – 50024-014