Toshiba RemotEye II User Manual page 101

Toshiba UPS Power Management
RemotEye II can help further protect critical load systems connected to a UPS by initiating automated
shutdowns on that equipment. RemotEye II can shutdown servers upon detection of three UPS events;
Input power failure, low battery, and overload. Also, RemotEye II can be used to coordinate automatic
system shutdowns during weekends or holidays. This section highlights the manners in which RemotEye
II can be used in conjunction with a UPS to manage power to UPS loads.
Set UPS to Output Shutdown Mode After Delay
Administrators can issue an output shutdown to Toshiba UPS via RemotEye II in any cases. To issue an
output shutdown command, go to UPS Control in the UPS Management menu. Login as an administrator.
Select the radio button beside Set UPS to Output Shutdown Mode After Delay and click the Apply button.
Scenario:
UPS Output Shutdown Delay (sec ):
Set UPS to Output Shutdown Mode After Delay: 22:20:00
22 : 20 : 00
INVERTER
OUTPUT
SHUTDOWN
100
180(default)
22 : 23 : 00
RemotEye II User Manual – 50024-014